Rough Country
1.5 Inch Leveling Kit | Ford Bronco II (84-90)/Ranger (83-97)
1.5 Inch Leveling Kit | Ford Bronco II (84-90)/Ranger (83-97)
Ships from our supplier. Online availability reflects supplier inventory, not stock at our shop. Check all vehicle fitment notes before ordering.
Couldn't load pickup availability
Give your Ford a level look from front to rear with Rough Country’s 1.5in coil spring leveling kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance, and is considered one of the best ways to lift a Ford truck! Once installed, this kit can run up to a 31x10.50 tire with factory wheel backspacing. Includes Rough Country’s 5-year Coil Spring Warranty!
Features
Easy bolt-on installation Increased ground clearance Levels the front with the rear of the vehicle
Fitment and installation notes
Fits all engine types
Front components
Leveling coil springs
Tire and wheel information
31x10.50R15:Factory 15:5x4.5:-:-;30x9.50R15:15x8:5x4.5:+30:-;31x10.50R20:20x9:5x4.5:+18:Trimming Required;31x10.50R20:20x9:5x4.5:+20:Trimming Required
Estimated installation time
1-3 hours
Vehicle fitment
Match the exact year, model, trim, drivetrain, and any cab or bed requirements in the notes.
| Years | Make | Model | Trim | Drive |
|---|---|---|---|---|
| 1983–1985 | Ford | Ranger | XLS | 4WD |
| 1983–1985 | Ford | Ranger | XLS | RWD |
| 1983–1986 | Ford | Ranger | Base | 4WD |
| 1983–1986 | Ford | Ranger | Base | RWD |
| 1983–1997 | Ford | Ranger | XL, XLT | 4WD |
| 1983–1997 | Ford | Ranger | XL, XLT | RWD |
| 1984–1985 | Ford | Bronco II | XLS | 4WD |
| 1984–1986 | Ford | Bronco II | Base | 4WD |
| 1984–1990 | Ford | Bronco II | Eddie Bauer, XLT | 4WD |
| 1984–1992 | Ford | Ranger | S | 4WD |
| 1984–1992 | Ford | Ranger | S | RWD |
| 1986–1994 | Ford | Ranger | STX | RWD |
| 1986–1997 | Ford | Ranger | STX | 4WD |
| 1987–1990 | Ford | Bronco II | XL | 4WD |
| 1987–1992 | Ford | Ranger | Custom | 4WD |
| 1987–1992 | Ford | Ranger | Custom | RWD |
| 1988–1989 | Ford | Ranger | GT | RWD |
| 1988–1990 | Ford | Bronco II | XL Sport | 4WD |
| 1989–1990 | Ford | Bronco II | XLT Plus | 4WD |
| 1990 | Ford | Ranger | S Plus | 4WD |
| 1990 | Ford | Ranger | S Plus | RWD |
| 1991–1994 | Ford | Explorer | Eddie Bauer, Sport, XL, XLT | 4WD |
| 1991–1994 | Ford | Explorer | Eddie Bauer, Sport, XL, XLT | RWD |
| 1991–1997 | Ford | Ranger | Sport | 4WD |
| 1991–1997 | Ford | Ranger | Sport | RWD |
| 1993–1994 | Ford | Explorer | Limited | 4WD |
| 1993–1994 | Ford | Explorer | Limited | RWD |
| 1993–1997 | Ford | Ranger | Splash | RWD |
| 1994–1997 | Ford | Ranger | Splash | 4WD |
| 1995 | Ford | Ranger | XL Sport | 4WD |
| 1995 | Ford | Ranger | XL Sport | RWD |
Installation instructions
View manufacturer instructions
Part number: 9264-4

